How to make your own sword bouquet

sword

Hey! So, I’m getting married in the nearish future, and while my fiance and I love steampunk and plan to have elements of it in our wedding, my heart will always lie with good ol’ Lord of the Rings and Renaissance faries.

I’m DIYing a lot of things for the wedding, including fabric flowers some sort of flowers for bridesmaids bouquets. I had bought a plastic flower holder thing at Hobby Lobby and I thought, “What shall I do with the plastic handle the girls hold? Should I wrap it in fabric, or ribbon, or paint it?” Then, I put wedding stuff aside and took up Sting, my replica LOTR sword my friend just got me. I was like “Look at me, I’m so freaking cool with my awesome orc slaying sword. I’m just going to carry Sting on my wedding da-…”

Oh. Snap. Thus, my sword bouquet was born.

This was a relatively easy and quick project, minus making all of the flowers. This tutorial is only for how to make the actual sword hilt handle and attach it to your bouquet, not how to make the flowers. But, that tutorial will come at a later date!

So, what do you need to make this?

Supplies

  • A Dremel with a metal cutting tool or a metal cutting saw. I originally started to use my jewelers saw, but this was taking way too long, so I moved to a Dremel.
  • Flowers/leaves. These can be fabric, like I used, silk, or even real ones, whatever you prefer. Brooches might also work, with some tweeking.
  • A sword or dagger with a hilt you like. The hilt is the only thing we’ll be using, so don’t worry about the scabbard or blade. I plan to use smaller daggers for my bridesmaids, and found some cheap options at this website, but feel free to use any sort. (Perhaps Machone’s katana for a zombie themed wedding, or Link’s sword for a geeky one? I personally plan to use a small version of Sting I think)
  • A ruler
  • Safety glasses
  • Safety gloves
  • Styrofoam ball. I used one out of a plastic bouquet holder I got at Hobby Lobby, but ended up taking it apart to just use the ball. I will probably get a bigger diameter ball in the future, for a more fuller bouquet. I’d also recommend it be a whole ball or oval, as oppose to a half circle.
  • Metal files/ a sander tool for the dremel.

Step One: Cutting your blade off

IMG_20140405_135701

Ok! Now, this is not my first choice of sword. I would have much more preferred a T-hilted sword, rather than this one which has a finger guard. However, this was the only sword I was ok with cutting up.

We will only be using the hilt, so find one with a hilt you like. Take into consideration extra designs on the hilt that may interfere with your bouquet. This sword’s hilt extended up into the blade past the hand guard at a weird angle, so that was kind of a hindrance, but once I added the leaves, you couldn’t see it.

IMG_20140405_135726

Now, we must cut the blade off, unless you’d prefer 8-30 inches of steel sticking out of your bouquet, which is totally fine if that’s how you want to roll. On most swords, the sharpened blade is not the full length of the steel, like mine. You can see how there are about 4 inches from the hilt to the sharpened edge. I chose to cut the blade off right before the sharpened part starts.

Start your cutting! Like I said, I originally started using my jewelers saw, but after 20 solid minutes of cutting, I was only 1/4th of the way in. I was like, this isn’t working. So, I got out my dremel and while my cut ended up being very icky looking, it only took about 10 minutes to cut the whole way through. Be sure to wear safety goggles and gloves. You’re holding a blade in one hand, a dremel/saw in the other, sparks will be flying, be careful. Do not attempt this step if you do not feel comfortable with it. Seriously.

IMG_20140406_002418

After you get your hilt off, you’ll want to go back with either files or a sander tool on a Dremel, as the cut edge will be sharp. Please be careful here as well.

IMG_20140406_002438

Step Two: Adding Styrofoam

Good job! Now, we have a weird super short and useless sword hilt. Let us add Styrofoam.

I originally had a plastic bouquet holder from Hobby Lobby. I ended up taking it apart to get the Styrofoam ball out. My ball was fairly small, maybe the same size as my fist. I feel this is too small in the end for my hilt, but in the future I’ll be using smaller dagger hilts, so it would be the right size for those. Keep in mind how full you want your bouquet and how big your hilt will be. I’d also suggest using a full round ball, not a half circle shape.

IMG_20140406_003033

Now, we just stick the blade into the Styrofoam! Even when the blade has been sanded down, it was fairly easy to work the blade into the ball. Depending on the type and size of Styrofoam, this may be messy, and you may even break the ball in half. Once again, made sure your blade isn’t too big for the ball. I didn’t have either of these problems, but I was worried it’d actually split the ball in 2, so be careful. I don’t have a picture, but I pushed the ball all the way to the hilt, so there is about 2 inches of blade sticking up from the ball, which in the end is hidden by flowers. Consider your blade height when cutting the blade, and compare it with diameter of your ball and how high your flowers will be sticking up.

IMG_20140406_005940

You can see the blade sticking up through the ball here, but once all the flowers were added, you couldn’t see the blade

Step Three: Adding your flowers

The best part! Now, like I said, I made my own leaves and flowers out of fabric with a wire in the back that stuck into the styrofoam. You can substitute anything though; feathers, silk flowers, even real ones if you get that special water holding styrofoam.

IMG_20140406_010245

So, just start sticking them in! I started at the bottom, by the hilt, and worked my way to the top. I personally put leaves on the very bottom, which draped and help hide the styrofoam where the hilt meets it, then added flowers, then used smaller flowers as I went higher. Like I said, the blade was sticking up about 2 inches from the ball, but once my flowers were added, that was hidden and I don’t plan to cut it shorter, though you may.

IMG_20140406_005934

One more note, this is not terribly stable. If I shook my finished bouquet, I think the flowers would fly out. Try making your wire into a cork screw shape and screwing them into the styrofoam, or once you are happy with your positioning, glue the flowers in.

Step Four: Wielding your sword hilt bouquet

Ok, I was wrong, this step is the best part. You’re done! Once I got my Dremel out, this took me about an hour from cutting the blade to finish. However, making the flowers has been weeks worth of work, but I’m making 7 of these for my bridesmaids. This is just a test piece, and most likely will require a bit more tweeking and changing to get it just right. I’m also pretty sure I need to add some Lord of the Rings paper flowers from book pages as well, because…come on, it needs it.

IMG_20140406_150435 IMG_20140406_175412 IMG_20140406_012819

So, there you go. For your special day, when a normal bouquet just doesn’t have that element of danger and adventure!

Update!

Since making these a few months ago, I actually decided to go with coffee filter flowers over my fabric flowers. Here’s the new and improved version, using filter and paper flowers that I’ve made. While this still isn’t the sword hilt I’ll be using (as evident by the blade sticking out of the top of the bouquet, because someone get’s all pissy when I want to cut his sword up) the flower part will be my final version of the bouquet. I’ll be buying the actual swords that I’ll be using in the next few months, and then they will all be done! Finally. Ug.

IMG_20140722_172502

IMG_20140722_172438

I originally published this tutorial on Instructables, and Offbeat Bride also featured it as well! I hope this can help you make your own epic bouquet for your special event, happy wielding!

Advertisements

About skittlekittle

Born and raised outside of Houston, Texas, Shanon then moved to Kansas for school. She earned her degree in technical theatre, majoring in props making and managing. She met her fiance while they were both in school, and he proposed to her at the Kansas City Renaissance Festival in Oct. 2013. Now, she spends all of her free time making things for their upcoming wedding in Oct. 2015!
This entry was posted in Bouquets and Flowers, Tutorials and tagged , , , , , , , , . Bookmark the permalink.

7 Responses to How to make your own sword bouquet

  1. Pingback: Invitations and Steampunk Save the Dates | breecraft

  2. Pingback: Sting sword handle flower bouquet of awesomness! | breecraft

  3. Pingback: Real Weddings: Karen and David | BreeCraft

  4. Pingback: Sword Bouquet Progress! | BreeCraft

  5. Pingback: Got My Wedding Sword! | BreeCraft

  6. Pingback: Update on my Sword Bouquets | BreeCraft

  7. Alana says:

    Absolutly beautiful!! Where did you get the swords from???

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s